How to Get Back Asus Zenphone 5 from Soft Brick

Dear Folks,

Very Warm Welcome,


Now I'm Writing this post for those who have facing hard bricked problem in #AsusZenphone5. Before some days same problem i have faced and i was fully fade up with my phone and i go too many shops for  repairing the phone but they charged too much for this. then i decided too solve it.


So when your phone is in USB Logo mode or Asus Logo Mode Then it's confirmed your phone has been bricked.



So, let’s start!
There are some files, please prepare to download :
  1.  IntelAndroidDrvSetup1.5.0.exe
  2. Asus USB Driver. Download here
  3.  Asus Zenfone 5 RAW firmware. Download here
  4.  xfstk-downloader-setup-1.5.1.exe
  5.  iSocUSB-Driver-Setup-1.0.4.exe
  6. Recovery Image. Download here
  7. ADB + Fastboot. Download here
Instruction : install above driver as per ranking. follow these instruction while installing:
  1. Right click on setup
  2. Select run as administrator 
Note : while installing isoc drive system may ask you to connect your device or restart your device. Don't skip those steps or it will result into driver not working case. Please allow all things asked by your pc . 
Driver Checkpoint: 
  • connect your device 
  • Wait for windows to install driver automatic . 
  • Right click on my computer , select "properties ". Go to "device manager". select "intel soc" 
  • when your phone is turned on a USB patterns and connected to the computer there should be two new devices, are classified under Intel Soc: CloverviewPlus Device and Intel Soc USB Driver . 
If both are not showing in soc section try restating your computer . Check again still no improvement then :
First check the phone has been connected to the computer which also appeared Device Manager device described above,openxFSTK DOWNLOADER 
After opening note beneath the tabs to switch to the rearmost CLVP A0 / B0 / B1

Open xFSTK Downloader application, and click on the CLVP A0/B0/B1 Tab

Confirm the Device status field which shows Scanning process in xFSTK Application: CLOVER VIEW PLUS TARGETS DETECTED: 0 The Device Manager inside It has detected devices.



Provide the proper file to xFSTK Application
Extract the firmware and look for these 5 files, you can copy them to another folder for easier access:
  • Fw Dnx : sec-dnx_fwr.bin
  • IFWI : sec-ifwi_prod.bin
  • OS dnx : sec-dnx_osr.bin
  • OS image : fastboot.xx.imp.pos.bin/droidboot.img.POS_sign.bin
Click on Options and select Modify Settings, click on the CLVP A0/B0/B1 Tab
Check “Include Softfuse File” and select soft_fuse.bin
Click OK



And Press Begin Download

After the completion of process the phone will automatically reboot if the boot screen becomes Intel inside patterns means your phone is in Back  .

Note: For installing ROM to use Adb method.

Download cyanogenmod 12/13/14




Bricked USB Logo
Bricked ASUS Logo
Thanks,

#Zenphone5, #AsusZenphone5, #softbrick, #Brick, #phonebrick

Comments

Popular posts from this blog

How to configure Glowroot with Liferay

How to Unlock Boot Loader of Htc Explorer